Industrial Epoxy Floor Coating – High gloss, chemical and abrasion resistant
REPOX-FC is an advanced formula two component epoxy polyamide coating system designed to provide a heavy duty gloss finish to concrete floor areas. REPOX-FC imparts a chemically resistant, hard, durable finish not attainable with conventional resin material.
REPOX-FC is supplied as a two-component system with extended pot life. This permits a unique 8 hour application period after mixing. REPOX-FC will then cure to a full gloss finish. REPOX-FC is available in a wide variety of custom colors.
Recommended Uses
REPOX-FC supplies outstanding hardness, durability, as well as chemical and abrasion resistance. REPOX-FC is particularly suitable for warehouse and factory floors, electronic mfg. areas, food processing plants, pharmaceutical plants, boiler rooms, sewerage installations, etc.
Surface Preparation
Concrete should be etched with RELEECE, manufactured by Capital Industries, Inc., or cleaned and degreased with RESOLVE, manufactured by Capital Industries, Inc., depending on job conditions. Technical assistance is available.
Chemical Resistance
| 24 Hr. Contact | |
| Nitric Acid 10% | Unaffected |
| Sulfuric Acid 10% | Unaffected |
| Hydrochloric Acid 30% | Unaffected |
| Citric Acid 15% | Unaffected |
| Phosphoric Acid 85% | Unaffected |
| Lactic Acid 25% | Unaffected |
| Sodium Hydroxide 30% | Unaffected |
| 60 Day Contact | |
| Lye | Unaffected |
| Mineral Spirits | Unaffected |
| Gasoline | Unaffected |
| Fuel Oil | Unaffected |
| Hydraulic Fluid | Unaffected |
| Alcohol | Unaffected |
| Clorox | Unaffected |
Application
Highly dense or steel troweled concrete should be cleaned and etched with RELEECE, manufactured by Capital Industries, Inc..Previously coated surfaces should be cleaned and degreased with RESOLVE, manufactured by Capital Industries, Inc..
Mix Ratio
1 part mix A to 1 part mix B
Method of Application:
Phonelic core roller, spray, or brush
Coverage
| Prime Coat | 225 to 250 square feet per gallon depending on porosity |
| Finish Coat | 300 to 350 square feet per gallon |
Technical service is available for any questions.
Packaging:
| 10 Gallon Units | (1-5 Gal REPOX-FC mix A & 1-5 Gal REPOX-FC mix B) |
| 2 Gallon Units | (1-1 Gal REPOX-FC mix A & 1-1 Gal REPOX-FC mix B) |
Contact Us for Concrete Epoxy Floor Coating & Sealant Products
